What is the best way to clean marble floors?

In a nutshell, gently. The following are the recommended strategies for keeping beautiful floors.

Step 1: Keep the dirt to a minimum.

Preventative care is always the best option. We propose that you place door mats with stiff bristles outside each entrance. Before stepping on marble, vigorously wipe the bottoms of your feet to remove dirt. Taking off your shoes is even better. It’s a good idea to avoid placing mats directly on marble surfaces. Some rubber backings have a chemical reaction with stone that causes it to discolor. Second, if dirt becomes trapped beneath the mat, it will begin to grind away at the marble surface when the mat is walked on.

Step 2: Sweep on a daily or weekly basis.

Dirt and dirt work on marble in the same way that sandpaper does, scuffing and dulling the seal and surface. Make a point of cleaning one once per week for each member of the household, including pets. As long as you have a no-shoes-allowed policy in place and your pets aren’t huge shedders, one time per two members should be adequate. Briefly said, sweep as often as necessary to keep grit off the floors.

The following is the tool of choice: With a washable head, this microfiber or wool sweeper / dust mop can be used to clean surfaces. A vacuum designed for hard flooring is recommended; something that has tremendous suction to pulls debris out of the small pores of marble.

Step 3: Mop on a regular basis.

After you’ve completed the first two steps, your marble floors will become dirty at such a sluggish rate that you won’t notice the gradual alterations. Even in the cleanest of homes, though, they will inevitably gather dust and filth. Therefore, it is critical to mop the floors on a regular basis, even if the flooring does not appear to be in need of cleaning.

Make an informed decision regarding your cleaning. Keep harsh cleaners to a minimum. Citrus cleansers are wonderful for filthy garage floors, but they’re dreadful for marble and other delicate surfaces. Mild dish detergent for marble is recommended, with 12 cups per pail of water. Aside from the constant suds that would be produced, it would also leave a residue on the floor that would dull it. To get rid of it, you’d have to use a lot more water than is recommended for marble.

It is recommended that you use a cleaning solution specifically designed for stone when cleaning. Spray it onto the marble and use a microfiber mop to gently work it into the surface of the floor surface. In addition, there should be no streaking or residue left after using it. You can forego the spray bottle in favor of a gallon refill that is more cost effective and your own spray bottle. The sealer contained within the product helps to maintain the factory seal. It does not end the need to routinely polish and reseal your marble floors with a penetrating sealer, but it does reduce the frequency with which you must do so.